Notices
The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.
Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise website.
Acknowledgments
The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise website.
Microsoft® and Windows® are trademarks of the Microsoft group of companies.
Description
SR 2017.05
, the capability of dashboard to launch the configuration wizards, launching SSA from pool manager, pool manager with lesser options and the flexibilty to create custom pool of your choice. This service release includes the following systems running Windows Storage Server 2012 R2:
Starting with
SR 2015.10.5
, the installation of the service release is through a new
Update Tool interface. On standalone systems, you can install the service releases by selecting the Standalone mode. On a two-node cluster, you can install the service releases by selecting the Coordinate or Cluster mode. For information on installing updates using the
Update Tool, see
Installation instructions.
Update recommendation
The following table contains a list of Quick Restore (QR) versions and related service releases that should have been applied prior to installing this latest service release.
StoreEasy QR Version |
The following service releases need to be applied prior to attempting to install the
|
---|---|
4.04.0d.29 |
None |
4.04.0c.37 |
None |
4.04.0b.15 |
SR 2016.05.5 + SR 2016.09.5 + 2017.03.5 (optional) |
4.04.0a.24 | SR 2016.01.5 + SR 2016.05.5 + SR 2016.09.5 + 2017.03.5 (optional) |
4.03.0b.12 |
SR 2015.07.5 + SR 2015.10.5 + SR 2016.01.5 + SR 2016.05.5 + SR 2016.09.5 + 2017.03.5 (optional) |
4.03.0a.84 |
SR 2015.07.5 + SR 2015.10.5 + SR 2016.01.5 + SR 2016.05.5 + SR 2016.09.5 + 2017.03.5 (optional) |
4.02.0a.95 |
SR 2015.03.5 + SR 2015.07.5 + SR 2015.10.5 + SR 2016.01.5 + SR 2016.05.5 + SR 2016.09.5 + 2017.03.5 (optional) |
4.00.1a.23 |
SR 2014.09 + SR 2014.12.5 + SR 2015.03.5 + SR 2015.07.5 + SR 2015.10.5 + SR 2016.01.5 + SR 2016.05.5 + SR 2016.09.5 + 2017.03.5 (optional) |
4.00.0b.4 |
SR 2014.09 + SR 2014.12.5 + SR 2015.03.5 + SR 2015.07.5 + SR 2015.10.5 + SR 2016.01.5 + SR 2016.05.5 + SR 2016.09.5 + 2017.03.5 (optional) |
4.00.0a.71 |
SR 2014.09 + SR 2014.12.5 + SR 2015.03.5 + SR 2015.07.5 + SR 2015.10.5 + SR 2016.01.5 + SR 2016.05.5 + SR 2016.09.5 + 2017.03.5 (optional) |
Prerequisites for the Update Tool
Prerequisites for using the Update Tool with Clustered Systems
Prerequisites for using the Update Tool in the Coordinator mode
- To use the Update Tool in the Coordinator mode, you must install the Update Tool only on the remote coordinator system.
-
The cluster and coordinator systems must be joined to the same domain.
-
The domain account used must have appropriate access to each node and should be a member of the local administrator account on each node.
Product models
HPE StoreEasy 1000 Storage product models
-
HPE StoreEasy 1430 Storage
-
HPE StoreEasy 1440 Storage
-
HPE StoreEasy 1450 Storage
-
HPE StoreEasy 1530 Storage
-
HPE StoreEasy 1540 Storage
-
HPE StoreEasy 1550 Storage
-
HPE StoreEasy 1630 Storage
-
HPE StoreEasy 1640 Storage
-
HPE StoreEasy 1650 Storage
-
HPE StoreEasy 1830 Storage
-
HPE StoreEasy 1840 Storage
-
HPE StoreEasy 1850 Storage
HPE StoreEasy 3000 Storage product models
-
HP StoreEasy 3850 Gateway System
-
HP StoreEasy 3850 Gateway Single Node
-
HPE StoreEasy 3830 Gateway Storage
-
HPE StoreEasy 3830 Gateway Storage Blade
-
HPE StoreEasy 3840 Gateway Storage
-
HPE StoreEasy 3840 Gateway Storage Blade
-
HPE StoreEasy 3850 Gateway Storage
-
HPE StoreEasy 3850 Gateway Storage
-
HPE StoreEasy 3850 Gateway Storage Blade
HPE StoreEasy 5000 Storage product model
HPE 3PAR StoreServ File Controller product model
Software components
Table 1 lists the software components that are included in this service release:
Component |
Version |
---|---|
StoreEasy Dashboard |
3.0.0.242 |
StoreEasy Dashboard Data Services |
3.1.0.2 |
Rest API (HP Management Web Services) |
3.0.0.429 |
NAS Online Help |
2.2.1 |
StoreEasy Storage Management Provider |
1.4.10 |
StoreEasy Pool Manager |
2.0.0.38 |
StoreEasy Pool Manager Provider |
1.3.23 |
StoreEasy Notification System |
1.00.0073 |
HPS Report |
9.8 |
Component |
Version |
---|---|
StoreEasy Dashboard |
1.3.0.240 |
StoreEasy Dashboard Data Services |
1.3.0.329 |
Rest API (HP Management Web Services) |
1.4.0.431 |
NAS Online Help |
2.2.1 |
StoreEasy Storage Management Provider |
1.4.9 |
Server Manager Extensions |
1.4.0.43 |
Network Configuration Tool |
1.3.0.10 |
StoreEasy ICT |
3.2.35 |
StoreEasy Notification System |
1.00.0067 |
Product Feedback Tool |
1.00.0013 |
HPS Report |
9.6 |
Service Pack for ProLiant components
The SPP bundle
SPP2016.10
is provided with this service release.
Supplement |
SPP supplement build components |
Version |
---|---|---|
|
Matrox G200eH Video Controller Driver for Windows Server 2012 and Server 2012 R2 |
9.15.1.143 |
|
HP Lights-Out Online Configuration Utility for Windows 2008/2012/2016 x64 Editions |
4.8.0.0 |
|
HP H2xx SAS/SATA Host Bus Adapter Driver for Microsoft Windows Server 2012 R2 x64 Editions |
2.68.64.1 |
|
HP System Management Homepage for Windows x64 |
7.6.0.11 |
|
HP ProLiant iLO 3/4 Channel Interface Driver for Windows X64 |
3.10.0.0 (J) |
|
HP ProLiant iLO 3/4 Management Controller Driver Package for Windows Server 2008/2012 X64 |
3.20.0.0 (B) |
|
HP Insight Diagnostics Online Edition for Windows x64 Editions |
10.60.2116.0 |
|
HP ProLiant Smart Array SAS/SATA Event Notification Service for Windows Server 2008 x64 Editions and Windows Server 2012 |
6.46.0.64 |
|
HP ProLiant Integrated Management Log Viewer for Windows Server x64 Editions |
7.6.0.0 |
|
HPE Insight Management Agents for Windows Server 2003/2008 x64 Editions |
10.60.0.0 |
|
HPE Insight Management WBEM Providers for Windows Server x64 Editions |
10.60.0.0 |
|
HP Broadcom 1Gb Drivers for Windows Server x64 Editions |
17.4.0.0(B) |
|
HPE Smart Storage Administrator (HPE SSA) for Windows 64-bit |
2.60.18.0 |
|
HPE Smart Storage Administrator (HPE SSA) CLI for Windows 64-bit |
2.60.18.0 |
|
HPE ProLiant Smart Array HPCISSS3 Controller Driver for Windows Server 2012 x64 Edition |
63.12.0.64 |
|
HPE ProLiant Gen9 chipset Identifier for Windows |
10.1.2.77 |
|
HP ProLiant Agentless Management Serivce for Windows x64 |
10.60.0.0 |
Operating systems
Microsoft Windows Storage Server 2012 R2 Standard Edition
Languages
Enhancements
SR 2017.05:
- Pool manager: The simplified pool manager with lesser options to choose from with flexibility to create custom pool of desire.
SSA can be launched from Pool Manager.
- Dashboard: The capability with dashboard to launch configuration wizards. User can open Server manager, Network Configuration Tool, Pool Manager, Failover cluster manager from the dashboard.
Fixes
Determining the current version
To determine if you must install the service release, you must verify the HPE System Installation and Recovery version that is running on the StoreEasy Storage. To determine the HPE System Installation and Recovery version, click Manage Storage Pools.
and clickAn HPE System Installation and Recovery version that is less than the version listed in the Description section indicates that you are running an older version of the HPE StoreEasy Storage software. HPE recommends that you upgrade to the latest version.
To determine the current service release version for StoreEasy 3000 and 3PAR StoreServ File Controller:
-
Log in to the server blade.
-
Open a command window.
-
Enter the following registry command and verify the service release version in the output:
C:\> reg query HKLM\Software\Hewlett-Packard\StorageServer
A service release that is less than the version listed in the output indicates you are running an older version of the StoreEasy software. HPE recommends that you upgrade to the latest version.
Installation instructions
-
Before installing the service release, ensure that the system drive on which you install the service release has a minimum 5GB of free space to accommodate the upgrade.
- In the Standalone mode, when the installation in progress, you cannot stop or cancel the process.
The Close button on the title bar is also unavailable during the installation.
Installing updates using the Update Tool (Standalone mode)
-
Double-click the Update Tool icon on the desktop to launch the tool. The available modes to install the updates appear.
-
Select a mode: Standalone, Co-ordinate or Cluster mode
-
Click Next.
-
On the Update Tool Input page, enter the required settings and click Next. The Update Tool Summary page appears.
-
Click Install. The installation starts and the tool navigates to the Update Tool Result page, which provides the status of the installation.
NOTE: For Standalone mode, you cannot cancel the installation after the installation starts. -
Click Open Log to view the log files that the system generates during the update installation.
NOTE: For a cluster system, you must select individual nodes and then click Open Log to view the logs for that particular node. -
The update will complete installation after you reboot the system.
Installing updates using the Update Tool (Cluster or Coordinator mode)
-
Launch the Update Tool by double-clicking the Update Tool icon on the desktop.
The available installation modes are displayed.
-
Select Cluster or Coordinator and click Next.
NOTE: For clusters with more than two nodes, select the Standalone mode after launching the Update Tool and then run the tool on each node of the cluster. -
Enter the domain username and password and click Next.
NOTE: The cluster name is displayed by default only if you select Cluster on the mode selection screen.The System Configuration Summary screen appears on which you can view the selected mode, name of the system, path of the update package, and a list of components to be installed.
-
Click Install.
The progress and status of each task is displayed.
-
Click Open Log to view the HPIM log of the selected node or click Close to close the Update Tool.
NOTE:- The Open Log and Close buttons are enabled only when the installation completes. These buttons are disabled when the installation is in progress.
- During installation, if you encounter the following message:
An internal powershell error occured. Please view the logs for more details.
Navigate toC:\nas\logs\UpdateTool\
to view the Update Tool logs. The logs indicated in the error message are the Update Tool logs, not HPIM logs of the system on which you launched the Update Tool.
If any component in the service release package requires a reboot, a warning message is displayed when you click Close. You can either proceed with the system restart or restart the system later to apply the updates. After installing the updates, you can uninstall the Update Tool from Control Panel.
Windows security updates and hotfixes
Issues and Workarounds
Procedure
For information on known issues and workarounds, see the Release Notes of your product listed in Prerequisites for the Update Tool.
Effective date
May 2017
Documentation feedback
HPE is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (docsfeedback@hpe.com). Include the document title and part number, version number, or the URL when submitting your feedback.