Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation.
These release notes describe the HP StoreEasy Storage service release (SR) 2014.09.01 for HP StoreEasy 1000 Storage, HP StoreEasy 3000 Storage, and HP 3PAR StoreServ File Controller running Windows Storage Server 2012. This service release can be used to upgrade an existing HP StoreEasy Storage that is running the latest QR version for the system being updated. For more information, see “Determining the current version”.
This section lists the HP StoreEasy Storage models.
HP StoreEasy 1430 Storage
HP StoreEasy 1530 Storage
HP StoreEasy 1630 Storage
HP StoreEasy 1830 Storage
HP StoreEasy 3830 Gateway Storage
HP StoreEasy 3830 Gateway Storage Blade
HP 3PAR StoreServ File Controller
This section describes the software component and version that is installed, updated, removed, or disabled for the partial and full service releases.
HP StoreEasy 1000
HP Pool Manager Provider 1.1.1.57
To determine if you must install the service release, you must verify the QR version that is running on the HP StoreEasy Storage.
To verify the version:
Log in to the server blade and open the command prompt.
Enter the following registry query command:
C:\> reg query HKLM\Software\Wow6432Node\Hewlett-Packard\StorageWorks
Verify the QR version in the output that is similar to the following:
HKEY_LOCAL_MACHINE\Software\Wow6432Node\Hewlett-Packard\StorageWorks\QuickRestore BASE REG_SZ 2.1.0.30 QRVersion REG_SZ 3.02.1a.123 A QRVersion that is less than the version listed in this document indicates you are running an older version of the StoreEasy software. Upgrading to the latest version is recommended.
NOTE: The QR version corresponds to the version of the System Recovery DVD that was shipped with the StoreEasy system. The System Recovery DVD is periodically updated. If you must perform a system recovery, check for a more recent version available on the web. For more information on system recovery, see the Administrator Guide for your model. | |
Instructions for installing the storage system are provided in the Quick Start Guide of your product.
Go to http://www.hp.com/go/support.
Select Drivers & Downloads.
Enter your product (for example, HP StoreEasy 1000 Storage, HP StoreEasy 3000 Storage, or HP 3PAR StoreServ File Controller v2) in Enter a product name or number and click Go.
Select your model, select the operating system, and then select the service release.
Copy SR.2014.09.01.exe to a temporary folder on your system.
Run SR.2014.09.01.exe on the server and follow the prompts on the service release installation window. Run the service release installer until the required components are installed.
Accept the EULA (End-User License Agreement).
Verify that all components are selected for installation. If any of the components are not selected, then select those components before starting the installation.
Click Install.
After installing all selected components, reboot the system.
For HP StoreEasy 3000 Storage System and HP 3PAR File Controller v2 run the Update-StorageProviderCache -DiscoveryLevel Full –PassThru command on an elevated PowerShell command prompt on all nodes of the cluster to update the latest storage related information in the cache.
NOTE: SMI-S registration can be performed using ICT (Initial Configuration Task) or by running the following command:
For SMI-S registration, use port number 5988 for HTTP protocol or port number 5989 for HTTPS protocol. However, HP recommends that you register using HTTPS protocol to achieve high level of security and also to ensure that the SSL certificates are appropriately configured. When prompted, enter credentials for the array that have appropriate edit permissions. For HP 3PAR StoreServ Storage systems, the user must have edit permissions on the array or in the virtual domain, if applicable. | |
Software components from HP Service Pack for ProLiant (SPP) Version 2014.06.0:
| Component name | Version |
|---|---|
HP Insight Diagnostics Online Edition | 9.64.1262 |
HP ProLiant iLO 3/4 Channel Interface Driver | 3.10.0.0 |
HP Lights-Out Online Configuration Utility | 4.3.0.0 |
HP ProLiant iLO 3/4 Management Controller Package | 3.9.0.0 |
HP Insight Management Agents | 9.60.0.0 |
Matrox Graphics Software | 4.1.1.5 |
HP ProLiant Integrated Management Log Viewer | 7.0.0 |
HP System Management Homepage | 7.3.3 |
HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2012 x64 | 7.3.3 |
HP ProLiant Smart Array SAS/SATA Controller Driver for Windows Server 2012 x64 | 62.28.0.64 |
HP ProLiant Smart Array SAS/SATA Event Notification Service | 6.36.0.64 |
Installing HP ProLiant Dynamic Smart Array RAID Controller Driver for Microsoft Windows Server 2012 | 62.10.0.64 |
This Service Release includes updates and security patches available on Windows update from 18 October 2013 to 09 September 2014.
IMPORTANT: Some updates depend on other updates being installed first. Therefore, it is necessary to run the service release, reboot, and then run the service release a second time. | |
HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (<docsfeedback@hp.com>). Include the document title and part number, version number, or the URL when submitting your feedback.